#sun-vario.
Posts on the Alpisto engineering blog filed under #sun-vario.
- 01#flybeeper #sun-vario #variometer
Fourteen metres that were never there: a soldered barometer's thermal drift
Everyone who builds these devices knows you must not solder near the barometer, and that the third rework kills it. Nobody says by how much. This one came off the bench at 470 Pa/K against a rated 0.5, inventing 14.5 metres of climb while sitting still. Thirty lines of firmware removed 95 % of that and every bench test agreed — until somebody picked the device up and the vario went the wrong way. The number behind the folklore, and why the fix helps an altimeter and provably cannot help a variometer.
24 min read - 02#flybeeper #sun-vario #variometer
Measuring a vario with a USB tester: 20 seconds per mode, and 420 µA that were never mine
I spent eight hours per data point measuring a solar variometer through its own capacitor. Then I measured the same device directly with a USB tester and got a full consumption curve in twelve minutes — along with a 420 µA floor that belonged to the cable, not the device. What both methods agree on, where they don't, and how to read a WITRN tester from Linux.
14 min read - 03#flybeeper #sun-vario #variometer
FlyBeeper SunVario: the vario you never charge
A solar audio variometer the size of a matchbox that runs off a lithium-ion capacitor instead of a battery. Thirty minutes of morning sun fills it from empty; a minute on USB-C is enough for a flying day. 29 × 34 × 12 mm, 9.8 g, one button, Bluetooth to your phone.
7 min read - 04#flybeeper #sun-vario #variometer
A 10-farad vario, measured: where every microamp goes
Eight hours of discharge logs on a solar variometer running off a 10 F lithium-ion capacitor. The current isn't constant, the buzzer isn't the main consumer, the barometer is — and the runtime formula that falls out of it. Plus what the enclosure had to become once the electronics stopped changing.
18 min read